钢管除锈机(GY-CX-J)本机体积小,安装方便,适用于厂房空间小,设备距离狭窄,并且钢管锈蚀层薄,除锈半径90mm。
钢管除锈机(GY-CX-J)除尘器
采用大功率的离心风机,把风机、消声器、除尘机、贮灰斗、弹灰器、电器、开关等结为一体,因此体积小,不需再另外设计风机、风管及安装的基础等,使除尘设计和施工工作大为简化.
由于采用水雾滤尘方法,除尘效率可达99%,因此除尘效率高。
除尘效果可达到排气口每立方含尘量不超过30毫克水压,>3Kg。
钢管除锈机(GY-CX-J)适用于各种干式磨床、工具磨床、砂轮机、车削铸造及塑料、化工、静电喷塑、棉纺、粮饲加工、水泥行业、制药、建材等产生粉尘场合的除尘和回收之用。
脉冲除尘器是在袋式除尘器的基础上改进的新型脉冲除尘器,综合了分室反吹各种脉冲喷吹除尘器的优点,克服了分室清灰强度不够,进出风分布不均等缺点,扩大了应用范围。
Y-CX-J series
Simple derusting machine
This machine is small in size, easy to install, applied to the small factory space, narrow device proximity, corrosion of thin steel pipe, maximum cleaning RADIUS of 90mm.
GY-CS-A100
Automatic dust catcher
GY-CS-A100 dust catcher
Centrifugal fan with high power, blower, silencer, dust and ash bucket, shell blower, electrical appliances, switches, been integrated.
Small size, do not need to design fan and wind pipe, dust collecting and construction work greatly simplified.
Due to the method of using water spray dust, the dust removal efficiency may reach 1, resulting in high dust removal efficiency.
Dust removal effect ,which can meet the exhaust dust content of not more than 30 mg per cubic water pressure, >3Kg.
GY-CF-A200
Pulse dust collector
GY-CF-A200
Applicable to all kinds of dry grinders, tool and cutter grinder, turning cast and electrostatic spray ,plastics, chemicals ,cotton, grain and processing ,cement industry ,pharmaceuticals ,building materials and other dust remover and retrieval.
Pulsed dust collector is a new type high efficient pulsed dust collector series based on the improvement of bag type collector.
Integrated compartment cleaning advantages of pulse jet dust collector , it have overcome the disadvantages that room cleaning was not strong enough ,inequality of wind distribution ,expanding the scope of application.