德国Agostech总线测试开发仿真软件

Xtm ....more than a simple analyzing tool   XTM不仅仅是个总线网络分析工具
Xtm is a software environment used to control embedded network nodes (electronic control units). It can

also be used to display and modify the inner states of that network nodes. Moreover it's possible to visualize

 the communication of embedded network nodes, to analyze it and, if required, to replace missing network nodes

 by simulation its network behaviour. You can also use Xtm in order to influence and complete the network traffic.

Xtm是应用于嵌入式网络控制节点（ECU）的一个软件，同时可以显示和修个网络节点内部的状态。另外，可以对嵌入式网络控制节点之间的通信实现可视化和分析。如果有需要，可以代替网络节点来进行模拟仿真。用户可以用xtm来完成整个网络的运行。

The supported networks for the moment are CAN, LIN, Ethernet (only UDP) and FlexRay. The serial interface of the

 PC and the K-line (with the corresponding adapter for the LAPcan card) can also be used for the communication

 with an external ECU.
In parallel to measurement or general network communication, the recording and replay of video streams is possible.

Video streams and measurement data can be time-synchronized.

Xtm is a result of cooperation with IBME and EK Tronic, Germany.

可以支持CAN、LIN、Ethernet（只是UDP）和FlexRay等网络。PC机内部的串行口和K－Line（为了适应LAPcan卡）同样可以与外部的

ECU通信。与此同时，Xtm可以在测试和通信的同时对数据进行记录和录像回放。录像存储和测试数据是同时的。

Xtm与IBME、EK Tronic和德国合作

Features 产品特点

Xtm has a modular structure. Xtm contains multiple software interfaces which allow communicating with different hardware

interfaces. Special software modules contain communication protocols e.g. CCP and XCP. Customized transport protocols e.g.

TP1.6 and TP2.0 can be handled by using the powerful Xtm-Script-Interpreter. The software-interfaces will be defined during the

 configuration phase and will not be directly illustrated during normal operation. Of course all data and signals which will be generated

 out of these interfaces will be displayed. All software interfaces are working independent from the graphical surface (GUI) in separated

and high priorities windows-threads. Consequently the calculation power of the computer with multiple CPU-Cores can be used optimized.

Xtm是一个模块化软件。包含适应于不同硬件通信接口的多个软件界面。专门的软件模块包含相应的通信协议，例如CCP和XCP。用户化的传输协议，

例如TP1.6和TP2.0，可以用Xtm-Script-Interpreter来处理，在配置过程中软件内部可以根据客户需求自定义，当然所有产生的信号和数据都可以显示。

所有的软件内部都在各自的图形表面和窗口下单独工作。

Standard-Applications  标准应用
• Measurement测试
• Visualization可视化
• Simulation仿真
• Evaluation评估
• Analyzing分析
• Storage存储

• Testing测试

Individual Tasks  个性化的服务

Xtm offers individual solutions for complex tasks, Xtm可以根据顾客复杂的要求提供完整的方案.
• KWP2000, ISO15765
• CCP, XCP, ODX, ASAP2
• Transport protocols (TP1.6, TP2.0)传输协议（TP1.6,TP2.0）
• Flash-programming快速编程
• Implementing of dll’s应用dll
• ECU simulationECU仿真
• Specific panels特定的平台

Script - Interpreter   脚本编译工具

• Powerfully programming tool的编程工具
• Access via Panel editor可进入编辑平台
• Rest-bus simulation总线仿真
• Complex controls 复杂的控制
• Gateway functions网关功能
• Set point value control 设置点控制
• calculation计算

名称：广州智维电子科技有限公司（www.triv.cn）

电话：020-38744186;020-38744187

传真：020-38744189

邮编：510640

地址：广州市天河区五山华南理工大学科技园2号楼205-206室

联系人：刘落实     电话：15999975195