高压无气喷涂机设备主要由进出辊道、涂油装置、油漆回收装置、固化装置、控制系统等部分组成。Composed of enter and run out rolling rails, coating device, paint recovery device, curing device and control system.
高压无气喷涂机设备主体（含设备内两组辊道）占地：4米长，2.5米宽，3米高。Machine(including enter and run out rolling rails) area: L 4m, W 2.5m, H 3m
4.涂装系统 coating system
高压无气喷涂机系统组成components：
包括搅拌油箱、油泵、阀、膜厚控制系统、油漆循环过滤系统、全部管路（管路采用耐UV漆腐蚀材料）、仪表和控制柜及其他必要辅件。Stir oil tank, oil pump, valve, film thickness control system, all pipeline（adopts anti-UV paint corrosion material）, gauges and control cabinet.
高压无气喷涂机涂装过程coating process：
钢管为切断的单只钢管，依次通过辊道进入涂油机。传感器获得钢管进入的信号后，将信号传给涂装控制系统，油泵输送涂料，对钢管进行涂装，膜厚控制系统控制膜厚，传感器获得钢管离开的信号，同时传给控制系统，遮光板关闭，单根钢管的喷涂作业完成。等待下一根钢管的到来。Cut single pipe run through coating machine one by one. After sensor receiving signal, it’s sent to coating control system, oil pump conveys paint to coat pipe, thickness controlled by control system, then sensor receiving signal to leave, sent to control system, barn doors close, the coating is finished, wait for next pipe.
